If you wear bichiya every day, you have seen it happen. Your earrings still look bright, your chain is fine, but the rings on your toes have gone grey. Many women take this as a sign they were sold fake silver. It is usually the opposite.
What tarnish actually is
Tarnish is a chemical reaction, not dirt and not damage. Silver reacts with sulphur compounds, mainly hydrogen sulphide, that are present in ordinary air. The reaction forms a very thin layer of silver sulphide on the surface. Silver sulphide is dark, so the metal looks grey, then brown, then close to black if it is left alone long enough.
The important part: this reaction needs silver. Sterling silver marked 925 is 92.5 per cent pure silver, with the rest usually copper for strength. That high silver content is exactly why it tarnishes.
Why toe rings go first
Toe rings live a harder life than any other piece you own. Think about where your feet spend the day.
- Water, many times a day. Bathing, washing up, mopping, wet bathroom floors. Moisture speeds up the reaction between silver and sulphur.
- Sweat. Feet sweat more than most people realise, and sweat contains salts and sulphur-bearing compounds that sit right against the metal.
- Floors, footwear and soap. Rubber chappals, cleaning liquids, detergents and soap residue all bring extra chemicals into contact with the ring.
- No rest. Most women never take their bichiya off. Earrings come out at night. Toe rings do not.
Put all of that together and a toe ring meets more moisture and more sulphur in a week than a pair of occasion earrings meets in a year. It will tarnish first. That is the chemistry working as expected.
Tarnish is not proof on its own, but it is a good sign
To be fair to the science: tarnish alone does not certify purity. Other metals discolour too, and plated pieces can show a different kind of wear, where the bright coating rubs off to reveal a yellow or coppery base. The only reliable proof of purity is the BIS hallmark, which on silver jewellery shows the purity grade (925 for sterling) along with the hallmark identification details.
What tarnish does tell you is that there is real silver at the surface, reacting the way silver should. Grey that polishes back to bright white silver is a very good sign. Colour that polishes through to a different metal underneath is not.
How to clean silver toe rings safely
- Use a silver polishing cloth. Rub along the bands for a minute. This lifts the sulphide layer without scratching.
- For heavier tarnish, wash in lukewarm water with a drop of mild soap, use a soft toothbrush very gently, rinse and dry fully before wearing.
- Skip toothpaste and harsh powders. They are abrasive. They leave fine scratches and strip the oxidised lines that give designed pieces their depth.
- Dry your feet properly. After a bath, pat the ring dry. Less moisture sitting on the metal means slower tarnish.
Why oxidised detail matters on a toe ring
Some designs are oxidised on purpose. On our Stacked Chevron Toe-Rings, several V-shaped bands are layered into one solid, adjustable ring, and each chevron is outlined with dark oxidised lines, handfinished by karigars in Jaipur. That deliberate darkness sits in the recesses and gives the geometry its edge. Polish the raised surfaces, leave the recesses alone, and the design stays sharp for years.
The short version
Your toe rings tarnish first because they work hardest. Real 925 silver reacts with the world around it, and a minute with a soft cloth brings it back. Check for the 925 hallmark, clean gently, and keep wearing them every day. That is what they are for.
Every Smith Jewels piece is 925 hallmarked sterling silver, handcrafted in Jaipur.